Page 1 of 1

[resolved] help please / besoin d'aide

Posted: 25 Feb 2009, 11:54
by veka
Bonjour a tous,

Je construit un serveur tmw personnel et il fonctionne sur mon reseau local sans soucis.

Mais je ne reussi pas a me connecter dessus depuis internet. Cela bloque a la connection a characters.

Tout mes ports sont ouverts ( 6901 , 6122 , 5122 ).

Pouvez-vous m'aider ?

Je suis desoler je ne parle pas anglais alors je vous propose une version traduite avec google. :oops:


pour tester :
serveur : veka-server.dyndns.org

Code: Select all

Hi all,

I built a server tmw and it works on my local network without problems.

But I fail to connect it from internet. This blocks the connection has characters.

All my ports are open (6901, 6122, 5122).

Can you help me?

I am sorry I do not speak English then I use the google translation . 

to test:
  server: veka-server.dyndns.org

Re: help please / besoin d'aide

Posted: 25 Feb 2009, 13:07
by Jaxad0127

Re: help please / besoin d'aide

Posted: 25 Feb 2009, 13:33
by veka
Merci,

maintenant je peut me connecter depuis internet.

Mais je ne peu pas me connecter depuis mon reseau local.

Code: Select all

Thank you,

now I can connect from internet.
But I just do not connect from my local network.
--------------------------------------
map_local.conf

// Character Server IP
char_ip: 192.168.1.15 <<---------- local network IP
[...]
// Map Server IP
map_ip: veka-server.dyndns.org <<---------- address dyndns

--------------------------------------
char_local.conf

// Login Server IP
login_ip: 192.168.1.15 <<---------- local network IP
[...]
// Character Server IP
char_ip: veka-server.dyndns.org <<---------- address dyndns

--------------------------------------

Re: help please / besoin d'aide

Posted: 25 Feb 2009, 13:35
by Jaxad0127
Make sure lan_support.conf has the local address of the server.

Re: help please / besoin d'aide

Posted: 25 Feb 2009, 14:03
by veka
Merci beaucoup

maintenant tout fonctionne

Je vais ecrire un tutoriel en francais pour expliquer l'installation.

Code: Select all

Thank you very much

Now everything works

I'll write a tutorial in French to explain the installation.