The Mana World Forums

Posted: **30 Dec 2005, 00:26**

I get this error since I-don't-remember-which version, so I can't play.

me@mymachine ~ $ tmw
The Mana World v0.0.18
Error: Could not find map file
me@mymachine ~ $

What can I do to continue playing?

Posted: **30 Dec 2005, 00:28**

See the logfile of TMW for more infor and paste it here.

Regards.

Posted: **30 Dec 2005, 01:03**

The last lines (previous lines doesn't seem very important in this case).

Code: Select all

[00:19:13] Error: Unknown error while decompressing map data!
[00:19:13] Error: Could not find map file

Posted: **30 Dec 2005, 02:37**

Is there everything ok with your gzip and zlib? Paste strace.

Regards.

Posted: **30 Dec 2005, 09:08**

Are you using Gentoo?

Posted: **30 Dec 2005, 11:20**

Yes, I am using Gentoo. Sorry, I wrote it in the subject, but forgot to write it in the message. Are there known problems with Gentoo?

Here I put the las few lines of strace (since the moment I think tmw tries to load the map):

Code: Select all

mmap2(NULL, 2461696, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb6052000
mmap2(NULL, 2461696, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb59a7000
munmap(0xb59a7000, 2461696)             = 0
mmap2(NULL, 2461696, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb59a7000
munmap(0xb6052000, 2461696)             = 0
open("/home/pablo//.tmw/updates/update-0.0.17-0.0.18.zip", O_RDONLY) = 13
lseek(13, 0, SEEK_SET)                  = 0
read(13, "PK\3\4", 4)                   = 4
read(13, "\24\0", 2)                    = 2
read(13, "\0\0", 2)                     = 2
read(13, "\10\0", 2)                    = 2
read(13, ",\275\2153", 4)               = 4
read(13, "\356\31\233\243", 4)          = 4
read(13, "\226\7\0\0", 4)               = 4
read(13, "\265\'\0\0", 4)               = 4
read(13, "\t\0", 2)                     = 2
read(13, "\25\0", 2)                    = 2
lseek(13, 60, SEEK_SET)                 = 60
read(13, "\305\232\333\216\3336\20\206\257\223\247`\f\24\271\330"..., 1942) = 1942
close(13)                               = 0
open("/home/pablo//.tmw/updates/update-0.0.17-0.0.18.zip", O_RDONLY) = 13
lseek(13, 486461, SEEK_SET)             = 486461
read(13, "PK\3\4", 4)                   = 4
read(13, "\24\0", 2)                    = 2
read(13, "\0\0", 2)                     = 2
read(13, "\10\0", 2)                    = 2
read(13, "\317\21m3", 4)                = 4
read(13, "\"C6\342", 4)                 = 4
read(13, "`\35\0\0", 4)                 = 4
read(13, "Y\37\0\0", 4)                 = 4
read(13, "\23\0", 2)                    = 2
read(13, "\25\0", 2)                    = 2
lseek(13, 486531, SEEK_SET)             = 486531
read(13, "\245xyXR]\333/Y6Y\221\231Q\251\320\370hZRV\217#P\16\331"..., 7520) = 7520
close(13)                               = 0
mmap2(NULL, 266240, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb67fa000
time([1135940929])                      = 1135940929
write(8, "[11:08:49] Error: Unknown error "..., 62) = 62
time([1135940929])                      = 1135940929
write(8, "[11:08:49] Error: Could not find"..., 42) = 42
write(2, "E", 1E)                        = 1
write(2, "r", 1r)                        = 1
write(2, "r", 1r)                        = 1
write(2, "o", 1o)                        = 1
write(2, "r", 1r)                        = 1
write(2, ":", 1:)                        = 1
write(2, " ", 1 )                        = 1
write(2, "C", 1C)                        = 1
write(2, "o", 1o)                        = 1
write(2, "u", 1u)                        = 1
write(2, "l", 1l)                        = 1
write(2, "d", 1d)                        = 1
write(2, " ", 1 )                        = 1
write(2, "n", 1n)                        = 1
write(2, "o", 1o)                        = 1
write(2, "t", 1t)                        = 1
write(2, " ", 1 )                        = 1
write(2, "f", 1f)                        = 1
write(2, "i", 1i)                        = 1
write(2, "n", 1n)                        = 1
write(2, "d", 1d)                        = 1
write(2, " ", 1 )                        = 1
write(2, "m", 1m)                        = 1
write(2, "a", 1a)                        = 1
write(2, "p", 1p)                        = 1
write(2, " ", 1 )                        = 1
write(2, "f", 1f)                        = 1
write(2, "i", 1i)                        = 1
write(2, "l", 1l)                        = 1
write(2, "e", 1e)                        = 1
write(2, "\n", 1
)                       = 1
rt_sigprocmask(SIG_SETMASK, NULL, [RTMIN], 8) = 0
rt_sigsuspend([] <unfinished ...>
--- SIGRTMIN (Unknown signal 32) @ 0 (0) ---
<... rt_sigsuspend resumed> )           = -1 EINTR (Interrupted system call)
sigreturn()                             = ? (mask now [RTMIN])
write(7, "\240\26\314\266\1\0\0\0\2@\0\0@F\374\267\3\0\0\0\0\0\0"..., 148) = 148
rt_sigprocmask(SIG_SETMASK, NULL, [RTMIN], 8) = 0
rt_sigsuspend([] <unfinished ...>
--- SIGRTMIN (Unknown signal 32) @ 0 (0) ---
<... rt_sigsuspend resumed> )           = -1 EINTR (Interrupted system call)
sigreturn()                             = ? (mask now [RTMIN])
write(7, "\240\26\314\266\1\0\0\0\3\200\0\0<\224\337\267\0\0\0\0"..., 148) = 148
close(9)                                = 0
write(4, "_\3\2\0\v\0 \3+\0\1\0", 12)   = 12
read(4, "\1\2\177\0\0\0\0\0.\0\0\3\0\0\0\0\0\0\0\0\5\0\0\0p\311"..., 32) = 32
write(5, "+\3\1\0", 4)                  = 4
read(5, "\1\2\375\f\0\0\0\0.\0\0\3\0\0\0\0\1\0\0\0\6\0\0\0HDq\10"..., 32) = 32
write(4, "\223\2\2\0\23\0 \3+\0\1\0", 12) = 12
read(4, "\1\2\201\0\0\0\0\0.\0\0\3\0\0\0\0\0\0\0\0\5\0\0\0p\311"..., 32) = 32
shmdt(0xb6891000)                       = 0
write(4, "\n\2\2\0\3\0 \3\4\0\2\0\21\0 \3<\0\2\0\22\0 \3O\0\2\0\20"..., 44) = 44
read(4, "\22\0\202\0\3\0 \3\3\0 \3\0@q\10\3\0 \3\0\0\0\0\370\'\223"..., 32) = 32
read(4, "\1\2\207\0\0\0\0\0.\0\0\3\0\0\0\0\0\0\0\0\5\0\0\0p\311"..., 32) = 32
write(5, "<\3\2\0\0\0@\3+\0\1\0", 12)   = 12
read(5, "\1\2\377\f\0\0\0\0.\0\0\3\0\0\0\0\0\0\0\0\6\0\0\0HDq\10"..., 32) = 32
shutdown(5, 2 /* send and receive */)   = 0
close(5)                                = 0
write(4, "<\2\2\0\0\0 \3+\0\1\0", 12)   = 12
read(4, 0xbfdc0570, 32)                 = -1 EAGAIN (Resource temporarily unavailable)
select(5, [4], NULL, NULL, NULL)        = 1 (in [4])
read(4, "\1\2\211\0\0\0\0\0.\0\0\3\0\0\0\0\0\0\0\0\5\0\0\0p\311"..., 32) = 32
shutdown(4, 2 /* send and receive */)   = 0
close(4)                                = 0
rt_sigaction(SIGSEGV, NULL, {0xb7d21e60, [], 0}, 8) = 0
rt_sigaction(SIGSEGV, {SIG_DFL}, NULL, 8) = 0
rt_sigaction(SIGBUS, NULL, {0xb7d21e60, [], 0}, 8) = 0
rt_sigaction(SIGBUS, {SIG_DFL}, NULL, 8) = 0
rt_sigaction(SIGFPE, NULL, {0xb7d21e60, [], 0}, 8) = 0
rt_sigaction(SIGFPE, {SIG_DFL}, NULL, 8) = 0
rt_sigaction(SIGQUIT, NULL, {0xb7d21e60, [], 0}, 8) = 0
rt_sigaction(SIGQUIT, {SIG_DFL}, NULL, 8) = 0
getpid()                                = 7879
getpid()                                = 7879
getpid()                                = 7879
getpid()                                = 7879
munmap(0xb6c66000, 372736)              = 0
munmap(0xb7fab000, 8192)                = 0
write(7, "\240\26\314\266\2\0\0\0\1\0\0\0\0@\250\267PJ\250\267\10"..., 148) = 148
rt_sigprocmask(SIG_SETMASK, NULL, [RTMIN], 8) = 0
rt_sigsuspend([] <unfinished ...>
--- SIGRTMIN (Unknown signal 32) @ 0 (0) ---
<... rt_sigsuspend resumed> )           = -1 EINTR (Interrupted system call)
sigreturn()                             = ? (mask now [RTMIN])
waitpid(7880, NULL, __WCLONE)           = 7880
munmap(0xb7f94000, 4096)                = 0
munmap(0xb7faa000, 4096)                = 0
exit_group(1)                           = ?

Posted: **30 Dec 2005, 15:07**

flamma wrote:Yes, I am using Gentoo. Sorry, I wrote it in the subject, but forgot to write it in the message. Are there known problems with Gentoo?

Yes this is an already reported problem by another Gentoo user.

Topic: Bug: Unknown error while decompressing map data

Sorry the strace doesn't seem very useful to me. Topic locked, discussion can continue in the earlier thread.

The Mana World Forums

Error: Could not find map file (gentoo ebuild)

Error: Could not find map file (gentoo ebuild)