Page 1 of 1

[WIP] Miner NPC

Posted: 19 Feb 2009, 16:54
by Haay
Just for the sake of variety. No anti-aliasing yet.

Re: [WIP] Miner NPC

Posted: 19 Feb 2009, 17:21
by Jaxad0127

Re: [WIP] Miner NPC

Posted: 20 Feb 2009, 23:10
by Matt
ilikethiswonebetter

Re: [WIP] Miner NPC

Posted: 21 Feb 2009, 02:32
by Ces
Variety is always good, especially is it nice with a (slightly) different pose.

Re: [WIP] Miner NPC

Posted: 21 Feb 2009, 03:39
by Jaxad0127
Ces wrote:Variety is always good, especially is it nice with a (slightly) different pose.
Client versions prior to 0.0.28 can't use more than 100 NPC views. 0.0.28(.1) can use about 952.

Re: [WIP] Miner NPC

Posted: 21 Feb 2009, 04:58
by Rotonen
That just delays initial implementation.

Re: [WIP] Miner NPC

Posted: 21 Feb 2009, 06:00
by Jaxad0127
Rotonen wrote:That just delays initial implementation.
True. And in reality, all monsters can also be used as NPC sprites, but the client will consider them monsters. At the moment, only standing frames work. I don't know if the 0.1 client can do this.

Re: [WIP] Miner NPC

Posted: 21 Feb 2009, 11:59
by kickinyourface
jaxad0127 wrote:
Ces wrote:Variety is always good, especially is it nice with a (slightly) different pose.
Client versions prior to 0.0.28 can't use more than 100 NPC views. 0.0.28(.1) can use about 952.
what about stopping the support of .27 and so on?

Re: [WIP] Miner NPC

Posted: 21 Feb 2009, 15:04
by Jaxad0127
kickinyourface wrote:
jaxad0127 wrote:
Ces wrote:Variety is always good, especially is it nice with a (slightly) different pose.
Client versions prior to 0.0.28 can't use more than 100 NPC views. 0.0.28(.1) can use about 952.
what about stopping the support of .27 and so on?
0.0.27 will most likely be supported for a while..

Re: [WIP] Miner NPC

Posted: 08 Mar 2009, 14:58
by Jaxad0127
Is this ready?

Re: [WIP] Miner NPC

Posted: 08 Mar 2009, 16:21
by Seradest
I like this one more ^^

Re: [WIP] Miner NPC

Posted: 08 Mar 2009, 18:48
by VOQY
perfect.

Re: [WIP] Miner NPC

Posted: 11 Mar 2009, 20:01
by Jaxad0127
Should I replace the older miner with this one?