Page 1 of 1

Tutorial: Sword#1

Posted: 13 Dec 2009, 18:51
by Amakuro
I did not know where to write this, I wrote here because I thought that in a good section, if it was a bad section please move.
I made a small tutorial for new userów who want to learn how to make a good sword (pixel-art).
Image

#1
Make a lineart (outline).
#2
Use grey color to shade a sword (if you want, you can to shade sword yellowish grey color)
#3
Use some colors to shade cross-guard.
@Hint: If you have a problem,use inner AA (http://en.wikipedia.org/wiki/Anti-aliasing).
#4
Use some colors to shade grip, but remember grip should not be thick.
@Hint: If you have a problem with shade grip,use a hint in 3 step.

If it could be useful to write a couple of other tutorials:)

Ps.Sorry i just pasted a picture but I had a rest and I did not have time to write an explanation.

Re: Tutorial: Sword#1

Posted: 13 Dec 2009, 19:03
by Crush
Thanks for the initiative. But I think it would be more helpful for newbies when you would write some words about what you are doing in each phase and most of all why you are doing it.

Re: Tutorial: Sword#1

Posted: 13 Dec 2009, 21:40
by Rotonen
Yes, having more tutorials around here is a very good idea.

Why the black outline?

Re: Tutorial: Sword#1

Posted: 13 Dec 2009, 22:43
by i
sword-tutorial.png
sword-tutorial.png (9.06 KiB) Viewed 3199 times
1. Draw simply outline with gray (#888888)
2. Use darker colour to fill one side of edge and lighter one to other side. Middle line should be the lightest.
3. Pick cold colour different than gray, eg. blue. Use opacity 15% to add some shadings.
4. Pick warm colour and add some highlights
5. Use 2 similar colours to draw hilt
6. Add some details
7. Adjust blade colour (duplicate blade layer, add colourize, set mix options and opacity, merge layers)
8. Pick white, set opacity 15% and add some highlights where needed
9. Add shadow (duplicate layer, ctrl+A, Shift+L, drag black on it, move it 1 px down, set layer opacity 15%)
~10. Just a preview on background other than white/transparent.

Re: Tutorial: Sword#1

Posted: 14 Dec 2009, 02:00
by bcs86
I tried to make a mallet using this tutorial. Wasn't able to make it as correct as I would have liked.
inventory-mallet.png
inventory-mallet.png (991 Bytes) Viewed 3163 times
Edit: Tried a hammer also.
inventory-hammer.png
inventory-hammer.png (986 Bytes) Viewed 3146 times

Re: Tutorial: Sword#1

Posted: 14 Dec 2009, 08:46
by i
bcs86 wrote:I tried to make a mallet using this tutorial. Wasn't able to make it as correct as I would have liked.
inventory-mallet.png
Edit: Tried a hammer also.
inventory-hammer.png
Actually they look pretty nice.

Re: Tutorial: Sword#1

Posted: 14 Dec 2009, 15:34
by Amakuro