The walls of Tulimshar

[Len]

Here's what I have so far:

You could save yourself some work by blending/fading (not by blurring, but by pixeling) the top part (that looks as if its taken from another set) into the wall, rather than doing each little brick.

"United Socialist States of America" not a fan of the new administration I take it

[kr0n05931]

"United Socialist States of America" not a fan of the new administration I take it

That's actually wishful thinking. I hope that he propels us into democratic socialism.

More progress:

castle3.png (54.53 KiB) Viewed 5383 times

[feline monstrosity]

"United Socialist States of America" not a fan of the new administration I take it

That's actually wishful thinking. I hope that he propels us into democratic socialism.

Hear hear!

Progress looks very good, but as Len says it doesn't blend too well at the top.

[Len]

Progress looks very good, but as Len says it doesn't blend too well at the top

I was just giving anouther option for marrying the two... he found his own way and it looks nice

[Modanung]

Looks good, keep going

[Matt]

Looks good, keep going

If you have time for writing things like that you have time for finish your three-year-old project too!

[yosuhara]

Looks good, keep going

If you have time for writing things like that you have time for finish your three-year-old project too!

word (sorry for one word response XD)

[Modanung]

Oh, I've got the time alright. I just spend too much of it.

[Spit23]

If no one does it I have to do it I guess

[Crush]

Thanks for taking this task. But the floor texture you added has perspective issues. Due to the view angle of TMW (45°) the length ratio of x axis to y axis on floor textures has to be 0.7:1 (can be approximated to 3:4 or 2:3 when necessary).

There is also one thing which worries me about Modanungs walls in general: They do not give an impression of "power" like the current ones. It might be due to the small bricks, but the wall looks very fragile in my opinion.

[Bertram]

Hi,

Yes, they couldn't be perfect but I feel like anything than the current ones could be better, even if it's just a transition.

Just a thought, so.

Regards,

[Spit23]

I edited the texture. I see what I can do to make them look stronger. Maybe a base or something like that.

[Bertram]

Hi,

they're getting better and better!

Regards,

[ElvenProgrammer]

They do not give an impression of "power" like the current ones. It might be due to the small bricks, but the wall looks very fragile in my opinion.

Could we try widening it a little. A width of a couple of tiles makes them also too thin for such a high and old wall. I'd make it at least 4 tiles wide.

[Fother]

They do not give an impression of "power" like the current ones. It might be due to the small bricks, but the wall looks very fragile in my opinion.

Could we try widening it a little. A width of a couple of tiles makes them also too thin for such a high and old wall. I'd make it at least 4 tiles wide.

Spit23 has this covered, there would just need to be two additional stair tiles for the South face set in case of wider walls (theoretically 1 additional tile if the edge of the current bottom step was nudged into the tile above it, but imo I'm happy with their current lengths and it's not something that will make a mapper whine).


What does this leave left in this set?

• South face
  • Archways
  • Doors (for interior wall towers or guard barracks entrance)
• North face
  • North facing towers
• East face
  • North-South walls
  • North-South stairs up
  • North-South stairs down
  • East towers
  • Archways
• West face
  • West towers
• Corners (not needed since these can be mapped with tiles from each face's big tower.)
• Accessories (stair extenders, accents, etc).