[DIS] Flask Of Blood + Ice Cube + Ice Arrow
[DIS] Flask Of Blood + Ice Cube + Ice Arrow
Hello everyone,
Here are 2 items that I made that are maybe unfinished. What do you think of these? Although, I would like a bit of help on the 2nd one.
Here is the Flask Of Blood: And here is the Ice Cube: The Flask Of Blood could be a rare drop of the Vampire Bats or of the Zombies.
The Ice Cube could replace the Piles Of Ash dropped by Ice Goblins because it has no sense at my thought, that an ice mob should drop a pile of ash.
How could I improve them, and especially the Ice Cube ?
Here are 2 items that I made that are maybe unfinished. What do you think of these? Although, I would like a bit of help on the 2nd one.
Here is the Flask Of Blood: And here is the Ice Cube: The Flask Of Blood could be a rare drop of the Vampire Bats or of the Zombies.
The Ice Cube could replace the Piles Of Ash dropped by Ice Goblins because it has no sense at my thought, that an ice mob should drop a pile of ash.
How could I improve them, and especially the Ice Cube ?
Last edited by Alige on 09 Jun 2011, 09:30, edited 3 times in total.
Re: [WIP] Flask Of Blood + Ice Cube
Flask of blood:
There are already some recolorable potion bottles in the data files which could easily be colored blood-red to look like they contain blood. When you really feel that we need another potion bottle please make it recolorable too, so that it can also be reused for other purposes. Information about the recolorisation system can be found here: http://wiki.themanaworld.org/index.php/Image_dyeing
Ice cube:
I would suggest to add a puddle of water under it. It would also make it look "colder" when you would make the internal edge lines brighter instead of darker than the texture color (or even better: use shading so that you don't need edge lines).
There are already some recolorable potion bottles in the data files which could easily be colored blood-red to look like they contain blood. When you really feel that we need another potion bottle please make it recolorable too, so that it can also be reused for other purposes. Information about the recolorisation system can be found here: http://wiki.themanaworld.org/index.php/Image_dyeing
Ice cube:
I would suggest to add a puddle of water under it. It would also make it look "colder" when you would make the internal edge lines brighter instead of darker than the texture color (or even better: use shading so that you don't need edge lines).
- former Manasource Programmer
- former TMW Pixel artist
- NOT a game master
Please do not send me any inquiries regarding player accounts on TMW.
You might have heard a certain rumor about me. This rumor is completely false. You might also have heard the other rumor about me. This rumor is 100% accurate.
Re: [WIP] Flask Of Blood + Ice Cube
Nice work G, I am really glad are contributing to the game.
With re-colouring, the new flask will be perfect for opaque liquids. Crush's suggestions for the ice cube would make it look perfect.
I know you said you didn't want to do anything too technical, but it would be a huge help if you wanted to learn how to add the items to the game. This would involve setting up your own local server, and then editing some text files to get the items into your local server for testing. If you are up to the challenge, let me know and I can help your through the process. If not, you might have to for someone with free time to use the graphics and add them in game.
With re-colouring, the new flask will be perfect for opaque liquids. Crush's suggestions for the ice cube would make it look perfect.
I know you said you didn't want to do anything too technical, but it would be a huge help if you wanted to learn how to add the items to the game. This would involve setting up your own local server, and then editing some text files to get the items into your local server for testing. If you are up to the challenge, let me know and I can help your through the process. If not, you might have to for someone with free time to use the graphics and add them in game.
Re: [WIP] Flask Of Blood + Ice Cube
About the flask : use less colors, avoid at all cost the automatic gradient tool. If it's glass, you can use stronger outlines to make the glass appear better. One or two white pixels nicely placed can also add a nice glass effect. You can also use more space, the 32*32 square is bigger than that. I made a couple of examples, the first one is the original version, the last one is a simple recoloring of the bottle of water :
About the ice cube, i don't think transparency will work. Again, use less colors (the example i made use only 4). Maybe change the shape a bit and add some water at the bottom to suggest melting.
About the ice cube, i don't think transparency will work. Again, use less colors (the example i made use only 4). Maybe change the shape a bit and add some water at the bottom to suggest melting.
Re: [WIP] Flask Of Blood + Ice Cube
looks really good, the thing that would really make it pop out at you is to add a glare color (white?) and it would make it look less like jello ..just imo
--------skipy
--------skipy
back to working on---> (crypt)then(player 1.5) and more. *been on hold do to my laptop being fix* any feel free to add/help. ill be up and working as soon as i can ...good luck to all.
"A mulatto, an albino
A mosquito, my libido
Yeah, hey, yay"---Nirvana
"A mulatto, an albino
A mosquito, my libido
Yeah, hey, yay"---Nirvana
Re: [WIP] Flask Of Blood + Ice Cube
Thank you for your suggestions, nmaligec I will talk to you by forum mail.
Howerver, I will put the updated items in a few moment cause I need to work on it.
About the use of ice cubes :
It can be used like the raw logs to make arrows but this time to make ice arrows (that I will create). The spell particles could be the ones of asorm.
I will create the Ice Arrows with special effect if I can.
Everyone : I am indeed interested by helping tmw development (really much) and I would like to know :
1) How do you do sprites (using gimp => that is what i use on mac)
2) How to put several items on the same image (I mean like the one with the different bottles).
Thank you for everything guys
Howerver, I will put the updated items in a few moment cause I need to work on it.
About the use of ice cubes :
It can be used like the raw logs to make arrows but this time to make ice arrows (that I will create). The spell particles could be the ones of asorm.
I will create the Ice Arrows with special effect if I can.
Everyone : I am indeed interested by helping tmw development (really much) and I would like to know :
1) How do you do sprites (using gimp => that is what i use on mac)
2) How to put several items on the same image (I mean like the one with the different bottles).
Thank you for everything guys
Re: [WIP] Flask Of Blood + Ice Cube
Errr... pixel them?Ali-G wrote:1) How do you do sprites (using gimp => that is what i use on mac)
Uhhh... copy & paste?2) How to put several items on the same image (I mean like the one with the different bottles).
Can you please be a bit more specific?
- former Manasource Programmer
- former TMW Pixel artist
- NOT a game master
Please do not send me any inquiries regarding player accounts on TMW.
You might have heard a certain rumor about me. This rumor is completely false. You might also have heard the other rumor about me. This rumor is 100% accurate.
Re: [WIP] Flask Of Blood + Ice Cube
Crush:
1) I mean how do you do animations (sprites no ?)
2) I know copy & paste but I need an image 32 x 64 for 2 items on the same image ?
1) I mean how do you do animations (sprites no ?)
2) I know copy & paste but I need an image 32 x 64 for 2 items on the same image ?
Re: [WIP] Flask Of Blood + Ice Cube
Note that I am using a different language version of gimp than you, so any menu options I mention might be translated inaccurately.
When you mean spritesets of animated sprites for the client: I switch the grid on (in the view options) and configure it to the size of the sprite I want to create. Then I draw one animation phase into each grid cell. But I am not very experienced with creating animations, so someone else might give some better advise here.
When you mean a gif animations (not useful for the TMW client itself, but useful for demonstrating animations to others): you can create those by creating a separate layer for every frame before you save it to gif format. Gimp should then prompt you if you want to merge the layers or rather create an animation where every layer is one frame.Ali-G wrote:1) I mean how do you do animations
When you mean spritesets of animated sprites for the client: I switch the grid on (in the view options) and configure it to the size of the sprite I want to create. Then I draw one animation phase into each grid cell. But I am not very experienced with creating animations, so someone else might give some better advise here.
Picture->Canvas Size allows you to change the size of your canvas. Make sure that you also adjust the size of your layer(s) while adjusting the size of your canvas. Otherwise you will have a larger canvas but your layer stays the same (it's border is marked by a yellow/black dashed line) and you can't draw outside of it.2) I know copy & paste but I need an image 32 x 64 for 2 items on the same image ?
- former Manasource Programmer
- former TMW Pixel artist
- NOT a game master
Please do not send me any inquiries regarding player accounts on TMW.
You might have heard a certain rumor about me. This rumor is completely false. You might also have heard the other rumor about me. This rumor is 100% accurate.
Re: [WIP] Flask Of Blood + Ice Cube
Ali-G, if you need help in animation just pm me, I can explain you maybe better in french.
"Time is an illusion. Lunchtime doubly so."
-- Ford Prefect
-- Ford Prefect
Re: [WIP] Flask Of Blood + Ice Cube
Ari, as that is a very well pixel-ed ice rock and would fit nicely in nivalus some place. I don't think it quite passes as a cube lol
Re: [WIP] Flask Of Blood + Ice Cube
Hello all, here is the ice cube posted by arikel but i changed it: now it looks more like a "cube"...:
PS: I made a bottle of blood for the vampire bat because I planned of taking TAW's drop of blood but the question is: How to transport or contain it? This sounds more logical to be in a flask.
Napalm.
Here is the promised ice arrow (suggestion: they can be made like the arrows from raw log but here from ice cubes (particles = same as asorm's)):
However, i am planning to update the bottle of blood but I will make different types of opaque bottles... that will be re colorable (so not just for blood).PS: I made a bottle of blood for the vampire bat because I planned of taking TAW's drop of blood but the question is: How to transport or contain it? This sounds more logical to be in a flask.
Napalm.
- baseballboy
- Knight
- Posts: 502
- Joined: 04 Jan 2009, 20:04
- Location: USA, North Carolina
Re: [WIP] Flask Of Blood + Ice Cube
Sound familiar?Ali-G wrote:ice arrow
BaseBaIIBoy - 99, Zalika - 95, Mou. - 86, baseballboy - 83, Abacus - 82, Laticia - 76
<o11c> More boobs please.
<o11c> More boobs please.
Re: [WIP] Flask Of Blood + Ice Cube
didn't understood your point...
Re: [WIP] Flask Of Blood + Ice Cube
Napalm (Ali-G ),Ali-G wrote: Here is the promised ice arrow (suggestion: they can be made like the arrows from raw log but here from ice cubes (particles = same as asorm's)):Attachment: wrote:
Weapon-arrow-ice.png [ 3.07 KiB | Viewed x times ]
for the particles that'll be the same as parumboo or kularzufrill for identifi the spell's school:
for the spell that'll be something like thatfate wrote:the particle effect does not match the current scheme, which identifies spells by school
Code: Select all
SPELL make-ice-arrows : "#?" =
LET level = 1
school = TRANSMUTE
IN (MANA 8, CASTTIME 5000,
REQUIRE skill(caster, MAGIC) > level,
REQUIRE skill(caster, school) > level,
COMPONENTS ["RawLog","IceCube"])
=> EFFECT CALL adjust_spellpower(school);
CALL default_effect();
CALL create_item("IceArrow", 1 + spellpower / 40 + (random(max(1, 800 - spellpower)) / 80), "IceCube", 500);
CALL gain_xp(1);
Lien ...