The Mana World Forums

Hello

I build this house.I want to know if I have build good and if it is good i can giveaway for you.

http://imagebin.org/216749

I restored some errors

What's your grid size? It seems to be 16x16, TMW only uses 32x32(and x*32) tiles.

Otherwise this shape is cool but there is a missing wall at the center-left of this room.

Reid wrote:What's your grid size? It seems to be 16x16, TMW only uses 32x32(and x*32) tiles.

Otherwise this shape is cool but there is a missing wall at the center-left of this room.

Yeah the grid size its 16x16. i will build another house with grid size 32x32 and i will modulate another house very good just for Tmw.

Hi rodrigo,

this looks much better than your previous attempts on creating an indoor map, beside of the grid size problem Reid already pointed out.

Do you already have some plan to which house this indoor belongs? And what it should be used for, what NPCs should be put in there?

Jenalya wrote:Hi rodrigo,

this looks much better than your previous attempts on creating an indoor map, beside of the grid size problem Reid already pointed out.

Do you already have some plan to which house this indoor belongs? And what it should be used for, what NPCs should be put in there?

Hello Jenalya

I had an idea for this indoor house . It can belongs house at Jack at city hurnscald.
I can also do a quest for this house there may also be a NPC.

rodrigo wrote:It can belongs house at Jack at city hurnscald.

When comparing the size of the houses in Hurnscald with the corresponding indoor, the house you created is too big to be Jack's.

rodrigo wrote:I can also do a quest for this house there may also be a NPC.

What kind of quest do you have in mind?

Jenalya wrote:

rodrigo wrote:It can belongs house at Jack at city hurnscald.

When comparing the size of the houses in Hurnscald with the corresponding indoor, the house you created is too big to be Jack's.

rodrigo wrote:I can also do a quest for this house there may also be a NPC.

What kind of quest do you have in mind?

Hiya


when i build house on Jack the hurnscald a small house for him, but tiled with 32x32 grid has a very large space and i do not know how to build that little house for Jack because there left more gray square without need.

rodrigo wrote:but tiled with 32x32 grid has a very large space and i do not know how to build that little house for Jack because there left more gray square without need.

Even though Tiled supports to build maps with different grid sizes than 32x32, the client can't display maps with other grid sizes. You would have noticed that when you would have actually tested your map.

Crush wrote:

rodrigo wrote:but tiled with 32x32 grid has a very large space and i do not know how to build that little house for Jack because there left more gray square without need.

Even though Tiled supports to build maps with different grid sizes than 32x32, the client can't display maps with other grid sizes. You would have noticed that when you would have actually tested your map.

Hello Crush

In this picture I have given an example for which I spoke

When you create a new map, you can set the size.
In case you want to work with the map you already created, you can resize the map in Map->Resize Map. In the dialogue that opens when clicking on that, you can define the size of your map in tiles and with the offset you can define where the parts of your already existing map should go.
Remember that there should be a border of collision tiles of at least 20 tiles.

If you want to create the indoor to Jack's house, I'd suggest to put it on 009-2, since that's where all the existing Hurnscald indoor is located. Here you also need to pay attention to the at least 20 tiles border of collision tiles between the different indoors.

Jenalya wrote:When you create a new map, you can set the size.
In case you want to work with the map you already created, you can resize the map in Map->Resize Map. In the dialogue that opens when clicking on that, you can define the size of your map in tiles and with the offset you can define where the parts of your already existing map should go.
Remember that there should be a border of collision tiles of at least 20 tiles.

If you want to create the indoor to Jack's house, I'd suggest to put it on 009-2, since that's where all the existing Hurnscald indoor is located. Here you also need to pay attention to the at least 20 tiles border of collision tiles between the different indoors.

Hello Jenalya


What do you think for this house?

The size fits much better for Jack's house than your previous map.
Additional to the things Crush pointed out, Jack's house seems to have an upper floor when looking at it from outside, so maybe there should be a stair and an upper floor?
Another thought, the bed is for two persons, does Jack have a wife? If so, who is it?

Jenalya wrote:Another thought, the bed is for two persons, does Jack have a wife? If so, who is it?

He and Sabine used to be dating, but they broke up because she wouldn't accept his hobbies:
http://www.youtube.com/watch?v=mL7n5mEmXJo